The internal structure of the fluid ceramic dispensing valve is divided into: ejector type, suction-back type, plunger type, diaphragm type, and the external structure is: square shape and cylindrical shape.
Click on the image for more
1. Commonly usedThimble type adjustable fluid dispensing ValveSuitable for: water-like fluid materials with good fluidity and low viscosity, such as grease, adhesives, alcohol, UV glue, oil, etc.
Related parameters:
Type: double-acting ejector type, working air pressure: 4-7Kgf/cm, minimum discharge volume: 0.01ml, operating viscosity: 1-1.000.000cps. Thimble typeAdjustableFluid dispensing valveMain material:Zirconium oxide ceramic,Inlet size: 1/8″npt(f), Flow adjustment: Available Dimensions (mm): (D) 21*21* (H) 130, square weight: 188g
2. Commonly usedBack-suction fluid dispensing< /strong>The valve is suitable for: fluid materials with poor fluidity and medium and high viscosity, such as epoxy resin, silicone, yellow glue, etc.
Related parameters:
Type: Double-acting suction type Working air pressure: 4-7Kgf/cm, Minimum discharge volume: 0.01ml, Operating viscosity: 1-1.000.000cps, Back suction type Fluid dispensing valve body material: < strong>Zirconium oxide toughened alumina ceramics,Inlet size: 1/4″npt(f) Overall dimensions (mm): (D)30*30*(H)145, cube weight: 408g
3. Commonly usedPlunger fluid ceramic dispensing valveSuitable for: good fluidity, medium viscosity Fluids, such as latex, paint, etc.
Related parameters:
Type: Single-acting plunger suction type Working air pressure: 4-7Kgf/cm, Minimum discharge volume: 0.01ml, Operating viscosity: 1-1.000.000cps, Plunger type Fluid dispensing valve body material :Zirconium oxide ceramic,Inlet size: 1/8″npt(f), overall size (mm): ￠30*(H)120, cylindrical weight: 206g,
4. Commonly used Diaphragm fluid dispensing valve is suitable for: quick-drying adhesives, anaerobic adhesives, etc. ,
Related parameters:
Type: single-actingDiaphragm type,working air pressure: 4-7Kgf/cm, minimum discharge volume: 0.01ml, operating viscosity: 1-1.000.000cps,Diaphragm typefluid point Valve body material: Zirconium oxide ceramic, Inlet size: 1/8″npt(f), flow adjustment: Yes. Overall dimensions (mm): ￠25×(H)105mm, cylindrical Weight: 120g
